SB Standard Custom Pet Doors for Doors
The Best Pet Doors by Design
Highest Quality Utility Pet Door in Custom Sizes
The SB Standard Models are now available in Custom Sizes giving customers the option for a lower cost solution when replacing older dog doors or models that have been discontinued
|Important Note: When having a door made to a rough cut opening in a wall; it is recommended that your hole in the door is a minimum of 1/8' larger than the rough cut dimension chosen for the custom door.|
Example 1: If the hole you are installing a pet door is 15" wide x 20" high, then you multiply 15x20=300 square inches. Look in the chart below to see what range 300 falls into for pricing. Important: your flap size will be 13"w x 18"h (there is a difference of 2" in width and height from rough-cut dimension to flap size).
Example 2: If you want a flap size of 15"wide x 20"high, then you would figure the rough-cut to be 17"w x 22" (minus 2" from each measurement because of the 2" difference between rough-cut and flap size). 17 x 22=374 square inches. Find 374 in the chart below for pricing.
Pricing for these custom doors is based on Rough Cut Dimensions
(width x height of your opening = Total sq. inches in chart below)
SB Standard Custom Made Pet Doors for Doors
|Rough Cut Dimensions
Square Inch Range
width x height)
SB Standard Custom Made Dog Doors for Doors
Custom pet doors can be made to fit an existing cut through a door or wall
as well as to a certain flap size.
Note: The flap size will always be approx. 2" less in width and height than the rough cut "hole" dimension.
See calculator above for exact measurements
Pricing is determined by the size of the cut through the wall or door;
We also offer doors that are LARGER than shown on the above chart; please call us at 1-800-829-7876 for assistance.
If you need a door in a specific time frame, please call us.
A specification / data sheet will be kept on file for reference with Moore Pet Supplies LLC & Security Boss Manufacturing LLC for any future replacement parts that may need to be ordered.
Pricing Starts at $116.99
Pricing starts at: $218.79
Complete pricing chart at bottom of this page
The pet opening will be 2" smaller in width and height than your rough cut (hole) dimension.
For instance, if your existing hole measures 14" wide x 20" tall, the actual pet opening will be 12" wide x 18" tall. This is true for door and wall mounts. (Actual variance is less 2" in width and 1 11/16th in height) This pet door will be custom made to sleeve into the hole in your door or wall or we can make it to whatever pet opening size you wish, just call us.. Your custom SB Standard pet door information will be kept on file with Moore Pet Supplies so that you can order replacement flaps just by giving us a call! You will be asked for the actual cut out dimensions on the order page Call 1-800-829-7876 to speak with our consultants if you have any questions or need help selecting the correct item for your situation.
Custom Made by Flap Size or Frame Dimension